Industry 4.0 Malaysia

Size : 15mtr, 20mtr, 30mtr What is sounding? As discussed earlier, sounding is the process for calculating the total quantity of fluid (oil, bilge, sludge, or water) inside a ship’s tank. First the depth of the fluid from the surface to the bottom of the tank is derived corresponding to which volumetric quantity is calculated using the sounding table.

Multi-pirpose hose W|P 20 BAR Common Applications
This high quality multi-pirpose hose is suitable for conveying most of the petroleum based product.

Tube
Black NBR rubber, oil resistant.

Reinforcement
High strength synthetic polyester braided.

Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature.

Applications

• Water Treatment Plant
• Drilling Rigs
• Gas Plant
• Sugar Industry
• Cooling Water Circulation
• Breweries
• Heating & Air Conditioning
• Chemical Industry
• Pneumatic Conveyors
• Waste Effluent Treatment Plant
• Compressed Air

Ductile iron is a family of cast graphitic irons which possess high strength, ductility and resistance to shock. Annealed cast ductile iron can be bent, twisted or deformed without fracturing. Its strength, toughness and ductility duplicate many grades of steel and far exceed those of standard gray irons.

Technical Requirements

1. Design & manufacture as to : API 602
2. Screw Ends Standard : ASME B1. 20. 1
3. Testing record as to : API 598
4. Pressure - Temperature conforms as to : ASME B16.

Functional Principle The spring-assisted DISCO non-return valve opens when the opening force exceeds the closing force . The opening force depends on the pressure or the volume flow, and the closing force on the tension of the closing spring, on the closing weight, on the installation position and the size of the non- return valve.

Air control valves are fundamental components of any pneumatic system. Selecting the right air control valves to regulate system pressure, direction of flow, and rate of flow is crucial when designing fluid power circuitry. If the pneumatic valve is too big for your application, you will be wasting air and money. If it’s too small, the actuator will not function properly.